Top Class Non - Cured Rubberized Bitumen Waterproof Paint

• Customization: Available
• Color: Black
• Appearance: Liquid
• Model NO.: FYC
• Method: Spray/Brush
• Level: Finish Coat
• Drying Method: Air Drying
• Certification: ISO14001, RoHS, ISO9001
• Substrate: Any
• Components: Film Forming Matter
• Formation Mechanism: Conversion Type
• Kind: Non Curing Liquid Rubber
• Transport Package: in Barells
• Specification: 25kg/barrel
• Trademark: mingding
• Origin: China
• Production Capacity: 100ton Per Week

Product Description

Non Curing Liquid Rubber Modified Bitumen Waterproof Coating for Roofing, Ground

Descriptions:

Non curing liquid rubber asphalt waterproof coating ingredients:
High quality asphalt, polymeric modifier and the additive. 
It always keep gel-like after application.

Property:

1)Never curing, content of curing material more than 99%, almost no volatile. Always keep gel-like after construction.

2)Excellent resistance to corrosion, high and low temperature; Non-toxic, no odor, no pollution, flame-retardant.

3)Strong adhesion to any kind of substrate, can be applied on wet substrate.

4)Good flexibility, high elongation, well adapted to substrate deformation.

5)Strong self sealing. The non-curable rubber modified bitumen waterproof coating will flow to the damaged place and fill full in it.  

6)Simple application by airless spray, scraper. It's both ok to construction at normal temperature and sub-zero.

7)Compatible with other waterproof materials together to improve the waterproof effect.

8)Form the stable, seamless and complete waterproof layer.

 Advantages,

1. High solid content, more than 98%, no solvent or volatile matter.

2. Never be solidified. Always keep the state of creeping viscous paste, can resist the deformation of substrate.

3. Always keep excellent creeping property. Good self healing ability. Able to heal the concrete automatically, suitable for complex construction surface.

4. Strong adhesion to different kinds of substrates and membranes. Excellent bonding performance.

5. Can be used below -20ºC.

6. Wide range of application. It can be used on the wet surface without visible water and any other surface that made from various materials.

7. Easy to apply. Both brushing and spraying are ok. 

Application scope,

 1. Roofs, balconies, terraces and verandas.

2. Wet areas (under-tile) in bathrooms, kitchens, balconies, auxiliary rooms,etc.

3. Green roofs, flowerbeds, planter boxes.

4. Repair old bitumen felts, asphalt felts, EPDM and PVC membranes and old acrylic coatings.

5. Protection of polyurethane foam insulation.

6. Waterproofing and protection of concrete constructions like bridge-decks, tunnels, stadium stands, car parks, etc.

Techical data:
 

NO.	Item		Technical index
1	Flashing point/ºC≥		180
2	Solid content/%≥		98
3	Adhesion strength	Dry base	100%Cohesion damage
		Wet base
4	Elongation/mm≥		15
5	Low temperature flexibility		-20ºC,No crack
6	Heat resistance/ºC		65
			No slip, flow or drop
7	Heat deterioration (70ºC,168h)	Elongation/mm    ≥	15
		Low temperature flexibility	-15ºC,No crack
8	Acid resistance (2%H2SO4)	Externals	No change
		Elongation/mm    ≥	15
		Mass change/%	±2.0
9	Alkali resistance [0.1%NaOH+Saturated Ca(OH)2 solvent]	Externals	No change
		Elongation/mm     ≥	15
		Mass change/%	±2.0
10	Salt resistance (3%NaC1 Solvent)	Externals	No change
		Elongation/mm     ≥	15
		Mass change/%	±2.0
11	Self healing		No water penetration
12	Stress relaxation/%≤	No treatment	35
		Heat deterioration(70ºC,168h)
13	Anti-water breakthrough/0.6MPa		No waterproof breakthrough

 Application method,

    Non curing rubber bitumen waterproof coating has two application methods: Brushing and spraying. Select the suitable method according to substrate status. Check the spraying equipment before application. Make sure that the equipment is in good condition.

1. Clean up the substrate.

  Use a broom or hair drier to clean up the substrate mortar and construction wastes. Acceptance of the surface should be smooth, solid, drainage slope comply with the design requirements. The substrate can be wet but cannot have visible water on the surface.

2. Detail parts additional layer construction.

  The place such as roof rainwater mouth, roof tube roots, the inside and exposed corner of parapet and gutter firstly blade coating 2mm non curing rubber bitumen coating to make strengthen.

3. Painting on large area.

  Both brushing and spraying are ok.

4. After brushing or spraying, paving SBS modified bituminous waterproof membrane in time to guarantee strong adhesion performance. The membrane should be laid straight, smooth and no wrinkle. Overlapping width is 100mm. Overlap parts adopt cold stick method, and then brush or spray coating.

5. Water-storing test.

After the completion of the waterproof layer, water storage experiment is carried out in accordance with the regulations. Storage 24 hours no leakage is qualified.

 

FAQ:

1)About sample?

If you need some sample for reference,please let us know your fully address/ship
mode with courier,and we will arrange our available sample for your reference quickly.

2) About any question of your order?

If you have any question about your order, we will reply you in 24 hours.

3) About your requirement?

Excellent after-sales 24 hours online service and any certification you require, we will provide you quickly.

4)About our factory?

Welcome you to visit our factory at any time

SALES CONTACT:

SHOUGUANG MINGDING WATERPROOF MATERIALS CO.,LTD
SHOUGUANG FENGYUAN COMMERCIAL CO.,LTD
MS ALICE
MOBILE:[phone]
__________________________________________
AFTER SALES SERVICES(24 HOURSE ONLINE)
TEL: [phone]