K11 Rubber Film Waterproof coating
is a kind of waterproof material which is modified by alkali-resistant synthetic cement substrate.
Technical data:
| item |
I |
II |
| Tensile strength Mpa |
≥ 1.2 |
≥ 1.8 |
| elongation |
≥200 |
≥80 |
| impervious |
30min 0.3mpa |
30min 0.3mpa |
| Low temperature bendability |
-10 degrees |
-10 degrees |
| |
Heat resistance 100 degrees |
Heat resistance 100 degrees |
Product features:
- It can be applied on the wet base surface, and the waterproof layer has high mechanical strength and good wear resistance. 2. The coating can prevent moisture, salt pollution and inhibit the growth of bacteria. 3. The concrete can still maintain ventilation. Based on this product, the waterproof layer can be directly tiled, mosaic and so on. 4 Consistently high hydrostatic pressure with a negative water surface. 5 This product has a white and gray appearance.
Application process:
The base layer must be clean, solid, smooth, dry, ash-free, and sand-free
Pour the liquid material into the pre-prepared container according to the ratio, and then pour the powder into the liquid material in a ratio to stir well until the liquid, powder and.
Use a roller, a sprayer or a brush to evenly roll or spray the agitated slurry onto the cement base. The coating is 2-3 times, and the coating thickness is applied according to the design requirements.
The order of the coating is about 4 hours after the first application, the coating is dry and then painted in the direction of 90 degrees vertically, and so on.
After the construction is complete, it is forbidden to step on it within 24 hours. After it is completely dried, it can be used for other coverings (such as plastering, tiling, mosaic).
Constructions:
Used areas:
SHOUGUANG FENGYUAN COMMERCIAL CO.,LTD
Shouguang city,shandong province,china
Tel: 0086-13606475587
_____________________________________________
AFTER SALES
Mr yong
Tel: 0086-13305360330
Audited Supplier 
){kind=link}
){kind=link}