| Customization: | Available |
|---|---|
| Certification: | ISO, MSDS, CE |
| Thickness: | 1.5mm |
|
Still deciding? Get samples of US$ 1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
(1) grassroots paving waterproofing membrane surface (leveling layer) must be clean, and sprinkler guarantee grassroots moist. (Note: roofing leveling layer shall comply with GB50207-94 "roof engineering specification provides underground waterproof leveling layer should be consistent GBJ208-83 underground waterproof construction and acceptance of norms" provisions).
(2) containing cement weight 10% -15% PVA glue (107 glue 801 glue) the preparation of cement paste binder, mixing must be uniform, no precipitation, no coagulation block, no segregation phenomena can use.
(3) before the construction of the roof main waterproof layer should be concentrated on the drainage and structural complexity of the detail node seal the deal and an additional layer of paste, use additional layer membrane with the main waterproof layer membrane same material.
(4) sealing material using a polyether-type polyurethane. Such as the use of other sealing material, and the product should be free of mineral oil, petrolatum and other chemical substances affecting the performance of polyethylene.
(5) corner should be paved additional layer; yin and yang, angle, etc. are made of R = 20mm arc-shaped.
(6) the waterproofing membrane Stones should adopt full shop law, adhesive brushing the surface of the grass-roots level should be uniform, not open at the end, do not build up; adhesive brushing should immediately Stones membrane to prevent too long to affect the bond quality.
(7) Paving waterproofing membrane shall not wrinkle, must not force the the stretching membrane, while paving edge exclude the coil air below and excess adhesive, ensure the membrane and primary surface dense bonding between the layers of membrane.
(8) paving waterproofing membrane lap width shall not be less than 100mm. ?
(9) the upper and lower levels, and two adjacent membrane seams should be staggered, one third of the width.
FEATURES:
The upper and lower surface roughness, non-woven fibers were no rules cross structure, forming a three-dimensional mesh. Suitable for a variety of materials bonded, especially during solidification with cement material directly bonded, as long as no clear water can be construction, its good overall performance , high tensile strength, impermeability capability, low temperature flexibility small expansion coefficient , easy bonding, large friction coefficient can be directly located in the sand, the performance is stable and reliable. Is a non-toxic, pollution-free green products. the waterproof ground .The product is suitable for industrial and civil buildings roof waterproof, moisture across the gas, indoor wall surface moisture, toilet water, water conservancy pool library, channels, bridges and culverts waterproof, impervious, metallurgical and chemical pollution prevention, and water-resistant.
polyethylene polyester multilayer composite waterproofing membrane specifications size
specifications: 200g/m2-1500g/m2
Dimensions: Width 1150mm-1200mm
Length: 100m/roll, 50m/roll
Main construction
Company information
ShouGuang Mingding Waterproof Equipment Co.,Ltd is a professional manufacturer which is specialized in researching, producing, marketing and service waterproof equipment. As a private-owned enterprise, Our company is a famous supplier in the line of waterproof equipment in China, also an important supplier in the international markets. On the basis of absorbing foreign advanced science and technology, our factory has developed various kinds of advanced waterproof equipment plants, and has got many national patents. The factory is strictly in accordance with international quality system to ensure product quality. Our factory pursues the enterprise culture of sincere, realistic and innovation, adheres to the service goal of honesty, customer-oriented and win-win situation. We are looking forward to cooperating with you.
FAQ
Q1:How to get the sample?
A :We can provide you samples for quality inspection.According to our company policy, samples are free, we only charge the freight fee.The freight fee will be returned If you place the order.
Q2:What's are the MOQ?
A :The MOQ is 500 square meters usually.Also we can according to your condition to set the MOQ.
Q3:How about the delivery time?
A :Delivery time about 15days after your deposit or L/C at sight.
Q4:What kind of payment do you support?
A :T/T, L/C and Paypal are accepted.
Q5:What's your main market?
A :Our products are exported to Southeast Asia,The middle East,West Europe,Africa,Australia and etc.
Q6:Can we visit your factory to inspect the goods for the order?
A :Welcome to visit our factory to inspect the quality.We sincerely hope to establish a win-win cooperation relationship with you.
contacter :
){kind=link}