It is a new waterproof coating glue (transparent) made of special polymer copolymer as the base material and developed by a variety of modification additives. a kind of viscous liquid, which is mainly made of transparent colloid and various additives. After coating, it can form a tough, strong adhesive and transparent waterproof film, and form a complete waterproof system with the base. It can be applied to a variety of complex parts of the waterproof, can meet the requirements of and thickness of the design, to achieve long-term waterproof, anti-corrosion purpose.The product has film forming, flexibility, wear resistance, air permeability and excellent weather resistance. Can be directly painted on the wall tile, stone, cement concrete and other base, do not peel, powder, prevent cement anti alkali, effectively prevent the base material water seepage phenomenon, long service life, to enhance the durability of the wall provides a reliable guarantee, is a water-based environmental protection products.
Product Features
1, the coating is colorless, transparent, coating will not destroy the original wall decoration effect, will not appear yellow, dust, dust and other phenomena.
2. Heat resistance, ultraviolet resistance, ozone resistance, acid and alkali resistance, wide range of weather resistance; Mixed with special modifiers, surfactants.
3. The film has good film-forming property, strong adhesion and tenacity to resist the stress caused by deformation and cracking of the base layer.
4, with water as a dispersion medium, non-flammable, non-toxic, tasteless, does not pollute the environment, belongs to environmental protection products.
Sibaugh Chemical
Sibaugh Chemical
5, cold construction, safe operation, convenient construction, can be directly spray, paint, brush, scrape on the wall.
6, the film has microporous permeability, suitable for hot evaporation in the humid climate in the south, and not agitating.
7, the consumption is small, the cost is cheap.
Fold and edit the applicable scope of this paragraph
Scope of application
1, all kinds of buildings of external wall leakage waterproof repair, wall brick, marble, granite, cement-based inorganic materials such as anti-corrosion, waterproof impermeable coating.
2, cement, ceramics, glass and other inorganic materials of anti-corrosion, waterproof coating.
3, surface bottom, new and old roof walls, new and old basement, toilet, bath, parking platform, parking platform, swimming pool, civil air defense engineering anti-seepage moisture-proof, special-shaped structure, complex parts and other decorative waterproof (mildew proof) anticorrosion.
Fold up knitting
Base surface treatment
1, the surface must be smooth, solid, clean, no oil, dust and other pine animals.
2, the obvious gap and trachoma must be blocked with cement mortar, smooth, sharp edge should be removed.
3. Wet the substrate in advance until there is no water.
4, the newly poured concrete should have a certain dry curing time to prevent the impact of concrete shrinkage.
5, the old concrete surface must be washed with clean water, dry after brushing
Method of construction
1. Waterproof exterior porcelain tiles: thoroughly clean, dry, oil-free and dust-free base surface, repair cracks to eliminate honeycomb hemp surface, manual brush coating or high pressure mist spraying, to soak the full coverage of the degree.
2, cement-based concrete: swimming pool, foundation surface to be dense and firm, dry. Uneven and crack, need to batch scraping waterproof putty. General brushing 2-3 times can be, brushing should pay attention to the previous coating dry solid non-stick hand after coating again, and the direction of brushing should be crisscross. The interval time between each layer shall be subject to the dry solid non-stick coating of the previous layer. The maximum coating interval time shall not exceed 36 hours. The joints of the material can be coated directly. In case of rainy and humid environment, it is not suitable for construction.
3, after the construction of the waterproof layer, we should carefully check all parts of the whole project, especially the cracks in the outer wall tiles, and the coating should not be brush leakage, stratification, warping, cracks and other phenomena. To find out the cause of the problem, and timely repair.
Precautions
1, the construction should ensure that the product fully cover the base surface, maintenance 24 hours before other operations.
2, in the occasion of high wear resistance requirements such as pedestrian passage, need to add hardened layer to protect the film layer from damage
Packing and storage
Reference amount: 1kg of transparent waterproof adhesive for the outer wall can be applied to 4-6 square meters
Exterior View: slightly milky viscous liquid
Storage: Materials should be sealed and stored in a cool and ventilated place, shelf life of 12 months;
Executive standard: JC/T474-2008
Storage and Packing
Materials should be stored sealed in a cool and ventilated place with a shelf life of 12 months
Packing specifications :5kg/ barrel, 10kg/ barrel, 20kg/ barrel.
Audited Supplier 
Audited Supplier 
){kind=link}
){kind=link}